The outlines below show typical cable assembly configurations and reference points to determine overall length.

* A center marker label is fitted to all assemblies over 6” in length; two markers located close to the cable ends are fitted for assemblies greater than 10ft /120”/3m

Length In

6” to < 12”

12” to < 72”

72” < Length

Tol In

+0.50”/-0 00

+1.00”/-0 00

+2.00”/-0 00

Length Metric

16cm to < 30cm

30cm to < 180cm

180cm < Length

Tol In Metric

+1.5cm/-0 00

+3cm/-0 00

+6cm/-0 00

 

Note: For re ex assemblies with SMA direct solder or shell style connectors, the tolerances are...

 

2” to < 36”

36” to < 72”

72” < Length

±0.100”

±0.250”

±0.500”